The use of a special pump with a vacuum mechanism helps not only to strengthen the erection, but also to increase the size of the penis, as well as reaching longer underwear.The operating principle of this device is the difference in pressure to pump air from the ball into the pump, the penis increases in volume and takes a erect state.
In addition, regular workout with the emptiness is healed by the pelvic organs, improving blood circulation and saturated tissues with oxygen, vitamins and trace elements.Of course, to obtain all these effects, it is necessary to use the pump correctly.We will talk to you about how to use the pump vacuum in this article.
The pump mechanism
The design of the void pump is a cylindrical ball and a pump, with which the air is pumped by this ball.In it, the genitals are positioned during the procedure.Due to the effects created by the air and in the ARLESS space using the device, the result is obtained to increase penis parameters.
The process is as follows:
- During pumping of the air, the pressure decreases from the ball;
- Blood circulation increases sharply, the blood is actively hurrying to penis fabrics;
- During the negative pressure, the blood flow is improved;
- The caves, of which the Fallos tissue constitutes, are full of blood;
- The blood vessels of the penis increase it, both in length and in volume.
This workout with the emptiness allows, with the regularity of their implementation, it is added up to 4 cm to a long one month length and in circumference, up to half.It is necessary to use an empty pump for this newspaper 2-3 times a day, approaches of 20 minutes.
How to use it correctly
The milking that the pump classes is of high quality and effective, it is necessary to master the right technique.Errors when the pumping penis can cause injuries: blood vessels gap, hematomas and edema.Beginners are particularly recommended to pay attention to the rules for using an emptiness.
General rules and recommendations during pumping the genital organ include the following points:
- Carefully follow the hygiene of the genitals before and after the procedure;
- Even before and after using the pump, clean the penis and pump using hot water and soap;
- Before the procedure, perform a penis heating with a towel immersed in hot water or take a bath/shower;
- The initial use of the pump should be short - about 5 minutes;
- So the time must be gradually increased, reaching 15-20 minutes at the end;
- An increase after a single use will last about 2 hours;
- An erection after pumping will remain for 30 minutes, an hour.
The use of an emptiness is effective for a rapid increase in a member before sexual intercourse.
In general, all types of devices are effective, however, the rules of use may vary according to the type of device.
During the use of the pump, it is necessary to monitor the skin of the genitals and their general conditions.In the case of infectious and inflammatory processes in this sector, it will be necessary to refuse the use of the pump.
Air
Having prepared for use using hygiene and heating, study the instructions carefully.The correct use of the device and compliance with technology will avoid injuries and make the process safe.
The use scheme is as follows:
- The void cylinder must be tight at the base of the penis barrel.If an erection ring is connected to the kit, wear it, pressing it on pubis.
- It gradually begins to pump air with a pear;The movement should not be too intense.
- The first lesson continues for 5 minutes;In time and experience, increasing it to 10.
- In case of pain, stop using.
- Among the approaches it is necessary to take breaks of 30-60 seconds;At the moment, it is recommended to perform an intimate massage.
- Beyond a procedure, it is recommended to perform 5 sinking approaches.
When using a simple pump with a manual mechanism, he will have to act independently;The electric version will perform the work for you.The level of traction can be monitored using sensors under construction;The main thing is not to strive to increase the size of the penis as quickly as possible.An increase in fabric is a complex biological process and must occur at a corresponding rhythm.
Hydrope
Water pumps are considered easier to use;This type of device allows you to have a delicate effect, while remaining effective.The operating principle of hydraulicum is similar to the previous option.
Pomping is performed as follows:
- Perform the preliminary heating of the penis;
- Fill the device ball with hot water and headed down;
- Then wear the device, moving from the bottom upwards and press it at the base of the penis;
- Subsequently, it is necessary to give the pump with a horizontal position and start improving the pressure;
- So the air must be pumped and drained.
In a procedure, it is recommended to perform 5 pumping approaches at 20 minutes.Make sure that before extracting the penis from the ball it is the pressure;Otherwise, you risk getting microcack and other injuries.
Methods of pumping a member
There are several techniques for the use of an emptiness.The general procedure for everyone is the preliminary heating of the genitals: this is possible with the help of a towel immersed in hot water, as well as the adoption of a bathroom or a hot shower;Make sure the water is not too hot.
In addition, before any type of pumping, it is recommended to heal with the hands: it can be both techniques of intimate massage, and stretching, etc.
Packaging
This technique of use of the pump is designed to have a maximum effect on the penis.It is intended to a greater extent to lengthen the penis.In this case, the genitals must be placed in a ball of diameter slightly larger than the foul itself.
Packaging is performed in this way:
- As a preparation, it is necessary to reach a level of erection of 80%;
- Next, it is worth using the lubricant and strictly press the cylinder on the pubis;
- Verify that the sliding process is smooth;
- Set the minimum load and follow the sensors, noting your feelings.This is useful to further determine the necessary load.
Initially, do not put the tension to the maximum and do not completely extend the member: this can be done by removing the air from the cylinder not completely.The first set should take 10 minutes.During the execution of the second set, increase the pressure and extend the time to 15 minutes;To the third: strengthen the tension and pump for 20 minutes.
Among these approaches it is necessary to use 5 minutes for the breaks;Before each next approach, the erection level must be increased to 90 %.You have to train this way within a week;In the second week, pumping loads increase.The maximum pumping time is 25 minutes.
Classic member pomping technique
The classic method for using an emptiness to increase the penis in both parameters includes two main techniques:
- Extend the protein membrane;
- Increases the cavernous bodies of the penis.
The patterns of their execution are slightly different from each other.
Training for lengthening
- Scrotum massage for 5 minutes;
- Heating with a ferry for 5-10 minutes;
- Stretching, down and on the sides-10-15 minutes;
- Strong voltage - 10 minutes;
- Reverse stenDeggio/Sadsak/A-Rasting-10 minutes;
- Jelking (dry or wet) - 50 repetitions;
- Packaging - 3 approaches.
Vascular technique to increase the volume
- Scroto massage - 5 minutes;
- Warring - 10 minutes;
- Forward lengthening of medium intensity - 5 minutes;
- Jelking - 100 movements;
- Flexion of an erect penis - 10 minutes;
- Sitting on a penis with incomplete erection - 10 minutes;
- A pumping approach.
The number of approaches and breaks between them remain similar packaging techniques;However, the pump cylinder should be wider, which will work well to increase the volume.
In the break between the approaches, perform pushing the penis;Do it carefully to prevent painful sensations.
After the end of the entire procedure, it is advisable to apply a basic moisturizer to the genitals, for example a lotion for the body for children or use a special ointment with bruises.
In which phase the procedure consists
As you could already notice, the process of using an vacuum pump includes different phases.To obtain the desired result, it is necessary to observe the priority.We do not advise you to lose the phases or modify them in some places: the correct execution will be the key to the safe use of the pump.
Heating
Before using the pump, it is necessary to disperse the blood.To do this, heating a penis is performed: this can be done with a ferry, a compress of hot towel or, with a simple acceptance of a shower/bathroom.
Jelking
Stretching in gelatin technique is used as a preparation before using the pump.It is necessary to perform the "milking" of the penis, having previously lubricated the genital organ with a lubricant.The root of the rod is compressed by the capture of the thumb and index;This capture moves forward towards the head.For the occurrence of an average level of erection, about 50% require 50 of these movements;For the maximum allowed level of 80-90%-with 100 repetitions.
How to put a pump correctly
The pump cylinder must be placed on a member in a semi -pointed state.The cane of the penis, the pubis and the edge of the ball are processed with a lubricant.At the same time, do not allow scrotum lubrication to prevent absorption in the ball.
Therefore it is necessary to create a sealed space with rotation movements and slowly press the pump in the pubic area.It will also allow lubrication evenly.Create about 5 of these movements to obtain a complete estate.
Pump
The use of an emptiness can be performed in two ways, with the maximum and minimum injection it loses.
- The minimum sist of lymph
To begin with, it is necessary to establish an easy degree of pressure.The suction process should not lead to unease.After completing the absorption, make several movements to the ball, touching the genital organ.
From the sensations you should hear a pleasant pulsation and a change of pressure within 10 minutes.In the next 5 minutes, it is necessary to increase the pressure in a stronger way.If at the same time you hear a burning or tingling, reduce the pressure on a value.
At the end of the procedure, the genitals should become more serious;It must be taken in hand and perform a slight agitation.Then lubricate the member and perform the milking technique.
In the second approach, increase the pressure of a unit and with the third - for two.In the end, perform the gelatin technique.
- The maximum sap of sap
This technique allows the maximum to increase the member to the volume due to the powerful lymph exhaust.This happens due to the lack of massage among the approaches;At the same time, the total execution time is about an hour.
- Pump the usual pressure level for 5 minutes;
- For a minute, set the pressure on the minimum level;
- After ri -ires the first approach;
After an hour of this session, make an ice cream and then shake the organ about 50 times to get rid of stress.
The end of the session
In the end, it is necessary to gently reduce the load on the penis.Because of this:
- It is recommended to urinate after the procedure;
- If possible, take a bath or a shower;
- Put a rubber ring on the member rod and keep it for 40 minutes.
The manipulations described above are called the pumping technique of a member in the Zoinkert;It is popular among men from all over the world.
Beginners
Zoinzker's above technique is also suitable for beginners.During its execution, it is worth considering the following shades on how to use the void pump:
- If at the end of the procedure you notice the softness of the penis, lethargy and a weakened erection, the load must be reduced;
- To eliminate the accumulated lymph, you can use a gel with a bad;
- We highly recommend heating the device before wearing a member;
- Do not neglect the use of Gel Lord.
Beginning users should understand that proceeding immediately to pumping on maximum indicators can be dangerous and lead to various injuries.Even with a minimally set pressure, it is necessary to monitor your sensations;At the maximum parameters they can only be switched after a few months of regular use of the void pump.
How to take care of a pump
- After the purchase, the new pump must be completely washed with hot water and soap and treated with a disinfector;
- The same actions must be performed before and after each use of the void pump;
- Clean the dry device after cleaning and let it dry completely;
- In order for the pump to serve longer, it is recommended to use water -based and not fat gel waste.Do not use creams and gels containing oil refining products in the composition, for example mineral oil;
- You cannot boil the pump and treat it with agents containing alcohol - choose an immortal antiseptic.
Safety precautions
It is necessary to know the rules for the safe use of the void pump - otherwise the risk of side effects increases: edema, hematomas, redness, vascular damage, etc.In addition, excessive tension can cause tissue necrosis, rupture of ligaments and chronic dry skin.
Recommendations and rules for the safe use of the pump, provided by the producers, are as follows:
- If painful or unpleasant sensations occur during the procedure, stop the session immediately.Discover the cause of the discomfort: if it is an injury, the classes must be stopped until complete healing;
- The load must be increased without hitches, adding one unit every week.The achievement of the effect depends mainly on the regularity of the classes and not on the force of the impact;
- Beginners are not recommended to perform sessions to pump more than 40 minutes;Expert users must use the device for no more than an hour in a row.Too long the effect of emptiness can critically interrupt blood circulation;
- Furthermore, you shouldn't perform more than three sinking sessions per day - the too frequent use of the device can have the opposite effect.
Contraindications to use
It is worth remembering that in some cases the use of vacuum pumps can be contraindicated.These include these diseases and body conditions:
- Chronic diseases and infectious and inflammatory processes in the area of the parental system;
- Problems with the work of the liver and kidneys;
- Pathology in the foreskin;
- Cardiovascular system diseases;
- The risk of blood clots;
- Diabetes.
We recommend that you start pumping only after a preliminary consultation with a medical specialist in order to avoid negative health consequences.Starting, before starting to use the vacuum pump, we also advise you to carefully study the technique of use on photographic and video instructions and to know the reviews.
In short
An increase in a member when using an emptiness is more than real - and we are talking not only about the length of the penis, but also of its diameter.This result can only be obtained from regular and long -term classes, with the competent use of the device.
For beginners, we advise you to approach pumping with caution and to attract particular attention to the preparation for the procedure, trying not to overdo it.